Dirt biking is an exciting and adventurous sport that requires skill, focus, and practice. One of the most exhilarating aspects of dirt biking is jumping over ramps and obstacles. If you’re looking to take your dirt biking to the next level, building a dirt bike jump ramp is a great way to do it. In this guide, we’ll walk you through the process of building a dirt bike jump ramp and give you some tips on how to jump it safely.

Step 1: Choose Your Location

The first step in building a dirt bike jump ramp is to choose a suitable location. Look for a flat, open space that is free of any obstacles. You’ll need enough room to build a ramp and a run-up to the ramp. Ideally, the area should be at least 100 feet long and 50 feet wide.

Step 2: Gather Your Materials

To build a dirt bike jump ramp, you’ll need the following materials:

Plywood sheets (2-3)
2×4 lumber (8-10)
Wood screws
Saw
Hammer
Nails
Tape measure

Step 3: Build the Ramp

Start by measuring the length and height of the ramp you want to build. A good size for a beginner’s ramp is 6 feet long and 2-3 feet high. Cut the plywood sheets and 2×4 lumber to the appropriate size using a saw.

Next, build the frame of the ramp by attaching the 2×4 lumber to the plywood sheets using wood screws. Make sure the frame is sturdy and secure.

Once the frame is complete, attach plywood sheets to the frame using nails. Make sure the plywood sheets are securely fastened to the frame.

Step 4: Add the Run-Up

Now that the ramp is complete, it’s time to add the run-up. The run-up is the area where you’ll gain speed before hitting the ramp. Measure out a length of at least 20 feet for the run-up.

You can create the run-up by building a slight incline using dirt, or by using a series of wooden boards. Make sure the run-up is smooth and free of any obstacles.

Step 5: Test the Ramp

Before you start jumping the ramp, it’s important to test it out first. Ride up to the ramp at a slow speed and make sure it’s sturdy and secure. Gradually increase your speed until you feel comfortable jumping the ramp.

Step 6: Jump the Ramp

When jumping the ramp, it’s important to keep your speed consistent and maintain good balance. Approach the ramp with enough speed to clear the jump. As you approach the ramp, lean back slightly and pull up on the handlebars to lift the front wheel off the ground.

As you reach the top of the ramp, push down on the handlebars to level out the bike in the air. Land with both wheels on the ground and maintain your balance.

Building and jumping a dirt bike jump ramp is an exciting and rewarding experience. By following these steps and using caution, you can safely build and jump a ramp that will take your dirt biking to the next level. Remember to always wear appropriate safety gear, such as a helmet and protective clothing, and to practice on smaller jumps before attempting larger ones. With practice and perseverance, you’ll be jumping like a pro in no time!